Miscellaneous Installation Tools
WOOD MITER CUTTER
No. 855This tool has guide stops in the cutting anvil to make 0° and 45° cuts on both sides of the replaceable blade. The cutting anvil is also marked for...
View full details6-IN-1 SCREWDRIVER
No. 41A quality, professional grade tool featuring four different bits in one easy to handle screwdriver. Precision machining makes for simple, easy chan...
View full detailsELECTRIC HEAT GUN
No. 190Has a variable temperature output range from 650° F – 900° F. Simply adjust the air intake regulator for higher or lower heat. The housing, handle,...
View full detailsMITER CUTTER
No. 3104This tool makes fast, accurate angled and straight cuts in wood quarter round, plastic tile trim, rubber and more. Has a razor sharp replaceable st...
View full details3/4" STRAPPING TAPE
No. 289A popular glass filament reinforced tape. Used for tying carpet rolls, metal mouldings, sealing cartons and many other uses. Roll is 3/4" wide x 60...
View full detailsHACKSAW FRAME
No. 80951A sturdy, economically priced hacksaw frame with a 4" cutting depth. Steel parts are corrosion proof chrome plated. Die cast zinc handle has a pi...
View full detailsDOOR PIN TOOL
No. 362This tool removes door pins fast and easy without causing damage. The forked end fits snugly around the head of the pin so that equal pressure is a...
View full details24" HEAVY DUTY STEEL TOOL BOX
No. 158This all steel tool box features side handles, three latches (center latch has a hasp for a padlock) and a wrinkle black powder coat finish through...
View full detailsSTANLEY WONDER BAR
No. 55-515This all purpose tool is capable of performing numerous jobs. Has 1-1/4" wide slim tapered jaws that are smoothly ground and beveled to reduce the ...
View full detailsT-BEVEL SQUARE
No. 46-825A very useful tool for marking angles for diagonal cutting of tile. Positive locking device provides sure, consistent angle settings. Durable plast...
View full detailsCARPENTER SQUARE
No. 45-500Has square ends. Has accurate 45° ends for mitering work. One leg is 24" x 2", and the other is 16" x 1-1/2". Both legs have 1/8 inch graduations o...
View full detailsBLUE NITRILE GLOVES, 3.5 MIL (100/BOX)
No. VEN4145These single use gloves are chemical and puncture resistant, industrial grade (nonsterile) and have a wrist-length beaded cuff. The finger and ...
View full detailsSHOE COVERS (12/BOX)
No. VEN28200These shoe covers protect all types of floors from dirt and debris. Made from a three layer fabric for durability, one size fits most. Sold 12 ...
View full detailsBLACK NITRILE GLOVES, 6.5 MIL (50/BOX)
No. VEN6045NThese single use gloves are chemical and puncture resistant, industrial grade (nonsterile) and have a wrist-length beaded cuff. The finger and ...
View full detailsBLUE LATEX EXTRA LONG GLOVES (30/BOX)
No. VEN6025Premium extra long powder-free latex gloves. These gloves feature a 12" long cuff to keep material on the glove and off of you. One size fit...
View full detailsSTRAIGHT AVIATION SNIPS, 10"
No. SAS-10A high quality imported snips with alloy steel handles and hot forged molybdenum steel blades. Makes straight cuts 1-1/2" long in metal up to 18 Ga...
View full detailsWISS METALMASTER AVIATION SNIPS
No. M-3RThe jaws on this straight-cut snips are hot drop-forged from special molybdenum steel for wear resistance. Cutting edges are serrated to prevent sl...
View full details24" APOLLO LEVEL W/PLUMB SITE
No. 985-41X-24These Apollo™ series levels have a heavy-duty aluminum box frame with a red powder coat finish, shock absorbing end caps and are calibrated to an...
View full detailsCARPENTER SQUARE
No. 8PA small and useful square for floor covering pattern work. One leg is 12" x 1-1/2", and the other is 8" x 1". Has 1/8" graduations on both sides, s...
View full details6" WIDE SPACKLE KNIFE
No. 3F-6The blades of these professional quality scrapers are made from the best grade of tool steel. They are hardened, tempered, uniformly ground and pol...
View full detailsHOSE FOR LPG CYLINDER
No. 10-HIs 10' long, and has a No. 58 style nut on one end, and a male POL fitting on the other end. Used with a No. 5-HT Hose Torch and a standard 20 lb. ...
View full detailsHEAVY DUTY BUCKET DOLLY
No. 102-BDDolly is virtually impossible to tip since the bucket platform is only 5/8" above the floor, giving this dolly the lowest center of gravity of any ...
View full detailsCARPENTER SQUARE
No. 45-500CHas accurate 45° ends for mitering work. One leg is 24" x 2", and the other is 16" x 1-1/2". Both legs have 1/8 inch graduations on the face and ba...
View full details